Scale Quality Idlers

Link-Belt^® scale idlers are used in conjunction with mechanical-type weighing devices. They are available in CEMA D and E series for 20°, 35°, or 45° troughing installations. To prevent load shift and obtain weighing accuracy, these idlers are fabricated to rigid belt scale manufacturer’s specifications:

• Roll run-out does not exceed 0.015" T.I.R.
• Footstraps are within 0.015 of flat surface
• Axis of rolls is +031" from perpendicular through center of base
• Backing dimension of center roll is + 0.000"- 0.125"
• End bracket is perpendicular to base 90°+ 1°
• Troughing angle is template checked

All rolls are factory lubricated and “sealed for life.”

When ordering scale quality idlers denote “W” in the Syntron Material Handling model number (example: D3628W-36).