Electromechanical

Syntron® MF Heavy-Duty Electromechanical Feeders are the heavy-weights of bulk material handling and are used for higher capacity requirements. The eight heavy-duty models handle capacities from 100 to 4,000 tons per hour.*

Syntron® Heavy-Duty Electromechanical Feeders combine extra structural strength with durable components. The deep wing plates form a bridge between inlet and discharge suspension supports, providing extra strength for years of dependable service. Standard troughs feature unitized weldments—one-piece, completely welded units for greater strength. Troughs are also available with bolt-together construction for tunnel installations or other confined areas. MF Heavy-Duty Electromechanical Feeders are two-mass, spring-connected and sub-resonant-tuned. The exciter unit is connected to the trough with corrosion resistant polymeric drive springs, which reduces the stroke vertically while amplifying stroke in the direction of material flow.  This feature creates straight line motion providing maximum material flow rate and feeder capacity. Syntron feeders also utilize custom engineered electromechanical vibrators.  These vibrators feature an L10 life expectancy averaging over 100,000 hours in normal operations and they allow for quick removal via access from both sides of the feeder or out the bottom.  Attachments for safety cables are included on all Syntron® feeders.

MF Electromechanical Feeder Features

  • Operating frequency - 1100 VPM at 60Hz
  • Stroke: 0.25 - 0.36 inches
  • Start and operate in empty or fully-loaded state
  • Dependable, flexible, easily adjustable control
  • Precise sub-resonant tuning ratio
  • Stroke consistency and speed stability under varying material conditions
  • Reduces effects of varying headloadand material damping
  • Structural strength
  • Deep wing plates
  • Unitized weldments
  • Infinite unbalance adjustment
  • Achieve desired stroke with easy adjustment
  • Suitable for use in hazardous areas
  • Explosion-proof motors required by coal, coke or other hazardous environments are available
  • Bolt-in trough liners

*Based on dry sand weighing 100 pounds per cubic foot. Capacities vary depending on material characteristics, material density, trough length and width, trough liner type, feeder installation, skirt boards and hopper transitions.

About Us

A competitive industry leader with a reputation of providing high performance products, superior execution of services, and forward thinking engineering.

Why SMH?

Corporate Office

2730 Hwy 145 South
Saltillo, Mississippi 38866
+1 800 356 4898
+1 662 869 5711
Fax
+1 662 869 7493
Email
Contact Us

Newsletter Signup

Sign up for our e-newsletter to get the latest news, announcements, and product offerings from Syntron Material Handling.

© Syntron Material Handling 2020. Powered by Envoc.
Back to top
\