Link-Belt ® ball bearing rolls, offered in CEMA D and E series, are well suited for retrofit and replacement roll applications. Retrofit rolls can be designed specifically for use in your existing idler frames.
Link-Belt ® D2000 rolls feature 30mm ball bearings, Syntron Material Handling’s proprietary interference-fit pressed heads, a quad horizontal labyrinth outer seal, a delrin outer labyrinth member, a dual lip nitrile rubber inner seal and contact seals on both sides of the bearings. D2000 rolls are designed for harsh, medium to heavy-weight applications and are available for belt widths from 18” to 72”, and 20°, 35° and 45° trough belt idlers, flat return and v-return idlers in 5” and 6” diameters.
Link-Belt ® E2000 rolls are designed for the rugged, maximum capacity and continuous handling requirements of heavy, coarse and abrasive materials such as coal, iron ore, copper, large stone and overburden. Featuring an exceptionally robust seal design and 40mm ball bearings, E2000 rolls are available for belt widths from 36” to 96”, and 20, 35 and 45 troughed belt idlers, flat return and v-return idlers in 6” and 7” diameters.